Beginning of this page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Displaying present location in the site.
Home > News Room > NEC and NEC Electronics Successfully Develop "Low-Power, Low -Noise All-Digital Phase Lock Loop"

NEC and NEC Electronics Successfully Develop "Low-Power, Low -Noise All-Digital Phase Lock Loop" for Portable Wireless Terminals


the structure of newly developed ADPLL LSI

the structure of newly developed ADPLL LSI

*** For immediate use March 3, 2010

Tokyo, March 3, 2010 - NEC Corporation (NEC) and NEC Electronics Corporation (NECEL) today announced successful development of the "Low-Power Low-Noise All-Digital Phase Lock Loop (ADPLL)" LSI. The newly developed LSI is suitable for midget wireless equipment yielding a long operation lifetime for small-sized batteries. It also features low-phase noise, which is vital to many modern wireless systems, including Bluetooth, ZigBee, WiFi, and WiMAX.

- Features of the new PLL circuit

  1. Suitable for intermittently operated wireless equipment owing to the low-operation current and short lock-up time (recovery time from sleep mode) of 8.1 milliamperes (mA) and 20 microseconds, respectively. Operation lifetime for small-sized batteries can be as long as several years even for over-Mbps wireless transmission applications.

  2. Low-phase noise of -105 dBc/Hz in the frequency range of 2.1 GHz to 2.8 GHz being compatible with a wide variety of modern wireless systems.

  3. Small macro area of 0.37 mm2 including an on-chip Loop-Filter.

In recent years, there are increasing demands for short distance radio communication, such as remote controllers, alarm systems and automatic meter reading. Power consumption is one of the primary concerns of these systems in terms of long battery life. To keep the wireless module as small and lightweight as possible, severe restrictions are being imposed on battery size. As the battery size is reduced, the battery capacity also decreases, thus reducing the total available energy. Long battery life over several years is a desirable feature for these applications as it allows users to become free from battery replacement tasks.

For battery driven devices, intermittent operation is effective for extending battery life. However, analog-based PLL is not suitable for intermittent operations due to its long start-up time. In this regard, all-digital PLLs that allow quick operations are more suitable, together with their additional advantage of eliminating large on-chip passive filters. However, there are challenges to simultaneously achieving both the low power consumption and the low phase noise that are required in modern high-speed wireless systems.

The key building block of the newly designed ADPLL, the TDC (Time-to-Digital Converter), has a new architecture that can achieve high accuracy in time-domain signal processing with reduced power consumption: the novel architecture is based on a fine/coarse two-step phase comparison scheme that can greatly reduce the number of circuit elements to be powered in each timing-comparison step. Using such a scheme, only a fraction of the PLL circuit is powered, minimum time is required and the other circuits are automatically shut down. Meanwhile, in order to achieve a low phase noise for ADPLL, another novel design is employed that intentionally adds a random signal to the oscillator. This approach drastically suppresses undesired noise originating from digitally periodic control. Based on these two developments, the digital PLL technique is now made applicable to a high-speed wireless system that simultaneously requires low-noise and extremely low-power performance.

NEC and NECEL will continue to proactively carry out research and development to solve the issues of large power consumption and phase noise. The new all-digital PLL has the world's lowest power consumption, making it ideal for use in battery powered portable wireless equipment.

These results can also be applied to RF chips in support of any wireless standard. NEC and NECEL will continue to pursue research and development in this area towards early realization of small wireless equipment with long battery life.

NEC and NECEL presented the results of this research on February 10 at the IEEE International Solid State Circuits Conference (ISSCC 2010), held between February 7 - 11 in San Francisco, California, U.S.A.



About NEC Corporation
NEC Corporation is one of the world's leading providers of Internet, broadband network and enterprise business solutions dedicated to meeting the specialized needs of its diverse and global base of customers. NEC delivers tailored solutions in the key fields of computer, networking and electron devices, by integrating its technical strengths in IT and Networks, and by providing advanced semiconductor solutions through NEC Electronics Corporation. The NEC Group employs more than 140,000 people worldwide. For additional information, please visit the NEC home page at: http://www.nec.com.


About NEC Electronics
NEC Electronics Corporation (TSE: 6723) specializes in semiconductor products encompassing advanced technology solutions for the high-end computing and broadband networking markets, system solutions for the mobile handset, PC peripherals, automotive and digital consumer markets, and platform solutions for a wide range of customer applications. NEC Electronics Corporation has subsidiaries worldwide including NEC Electronics America, Inc. (www.am.necel.com) and NEC Electronics (Europe) GmbH (www.eu.necel.com). For additional information about NEC Electronics worldwide, visit www.necel.com.


NEC is a registered trademark of NEC Corporation. All Rights Reserved. Other product or service marks mentioned herein are the trademarks of their respective owners. (C)2010 NEC Corporation.


***

Press Contacts:

Chris Shimizu
NEC Corporation
+81-3-3798-6511
E-Mail:yc-shimizu@cb.jp.nec.com

Kyoko Okamoto
NEC Electronics Corporation
+81-44-435-1676
E-Mail:kyoko.okamoto@necel.com

Readers are advised that the press releases and other information posted on this site are current only on their original publication date. Please note that such press releases and other information may now be outdated or rendered inaccurate due to passage of time or subsequent material changes in facts and circumstance.

Top of this page

Copyright NEC Corporation. All rights reserved.